Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 104 / 534

104 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
8 Re-enter the console password.
9 Enter the
Reconnect idle time
. This is the amount of time in milliseconds that a telnet /
SSH console can remain idle or unused before it is reset.
10 Select the
Show scripts
plus symbol to show the following scripts:
NOTE: You must enter the script contents yourself for the 802.1X device you are adding.
Š
Initialization script — The expect script used to log into the console and enter enable
mode.
Š
Re-authentication script — The expect script used to perform endpoint re-
authentication.
Š
Exit script — The expect script used to exit the console.
11 Click
ok
.
TIP: Click revert to defaults to restore the default settings.
3.12 Quarantining, DHCP
To select the DHCP quarantine method:
Home window>>System configuration>>Quarantining
1 Select a cluster.
2 In the
Quarantine method
area, select the DHCP radio button.
3 Click
ok
.
The following sections contain more information:
Š
Section 3.12.1, “DHCP Server Configuration,” on page 104
Š
Section 3.12.2, “Setting DHCP Enforcement,” on page 104
Š
Section 3.12.3, “Adding a DHCP Quarantine Area,” on page 106
Š
Section 3.12.4, “Sorting the DHCP Quarantine Area,” on page 107
Š
Section 3.12.5, “Editing a DHCP Quarantine Area,” on page 108
Š
Section 3.12.6, “Deleting a DHCP Quarantine Area,” on page 108
3.12.1 DHCP Server Configuration
Inline DHCP server
is selected by default. If you want to use the DHCP plug-in, which
allows you to use multiple DHCP servers, see the instructions in Chapter 15, “DHCP Plug-in,” on
page 317 .
3.12.2 Setting DHCP Enforcement
NOTE: See Section 10.1.3, “Configuring Windows Update Service for XP SP2,” on page 233 for
information on using Windows Update Service for devices in quarantine.