Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 268 / 534

268 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
5 Select the
Show icon in notification area when connected
check box. This
enables the
Windows XP balloon help
utility, which can assist you when entering
information and troubleshooting errors.
6 Select the
Authentication
tab ( Figure 11-33 on page 267 ).
6a Select the
Enable IEE 802.1X authentication for this network
check
box.
6b Select an EAP type from the drop-down list. For this example, select
MD5-Challenge
.
IMPORTANT: This EAP type must match the EAP type selected in Section 11.3.1,
“Setting up the RADIUS Server,” on page 240 , Step 7q on page 248 .
6c Clear or select the
Authenticate as computer when computer
information is
available check box. The choice is yours.
7 Click
OK
.
8 Select to reboot if prompted.
Windows 2000 Professional Setup
To enable a Windows 2000 Professional endpoint for 802.1X:
1 Start the wireless service:
Windows desktop>>Start>>Settings>>Control Panel>>Administrative Tools>>Services
1a Select
Wireless Configuration
. If the
Status
column does not already show
Started
, start the service:
1. Right click on
Wireless Configuration
.
2. Select
Start
.
1b Close the
Services
window.