Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 189 / 534

End-user Access 189
no
vd
ocx
(e
n)
24
Ma
rch 20
09
NOTE: Novell ZENworks Network Access Control uses the Windows Messenger Service when
using agentless testing. If you have disabled this service ( http://www.microsoft.com/windowsxp/
using/security/learnmore/stopspam.mspx (http://www.microsoft.com/windowsxp/using/security/
learnmore/stopspam.mspx)
), agentless testing will not work.
TIP: If the end-user has not defined a login/password combination, the default login is usually
administrator with a blank password.
If the end-users are required to log in, or if the automatic connection methods fail, they must log in
using the following window:
Figure 5-28
End-user Login Credentials
If the
Allow end-users to have their administrator login information
saved for future access
option is selected on the
System
Configuration>>Testing methods
window, the end-user login window presents a check
box option to the end-users, allowing them to save their login credentials.
If the login credentials are correct, the
Testing
window is displayed (see Section 5.7.6, “Testing
Window,” on page 191 ).