Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 281 / 534

802.1X Quarantine Method 281
no
vd
ocx
(e
n)
24
Ma
rch 20
09
Expect Script Variables
Variables referenced with the syntax
${VARIABLE_NAME}
will be substituted with the value of
the variable at execution time.
The following variables may be referenced anywhere:
Š
USERNAME
— The username used to log in to the device
Š PASSWORD
— The password used to log in to the device
Š
ENABLE_USERNAME
— The username used to enter enable mode
Š ENABLE_PASSWORD
— The password used to enter enable mode
Š
IS_TELNET
— Set to "true" for a telnet connection (otherwise unset)
Š IS_SSH
— Set to "true" for an SSH connection (otherwise unset)
The following variables may be referenced from re-authentication script:
Š PORT
— The endpoint's port
Š
PORT_ID
— The endpoint's port ID, usually the same as
PORT
Š MAC
— The MAC address of the endpoint in colon/hex format (hh:hh:hh:hh:hh:hh)
Š
MAC_DOTTED_DECIMAL
— The MAC address of the endpoint in dotted decimal format
(ddd.ddd.ddd.ddd.ddd.ddd)
Š MAC_DOTTED_HEX
— The MAC address of the endpoint in dotted hex format
(hhhh.hhhh.hhhh)
Š IP_ADDRESS
— The IP address of the endpoint in dotted decimal format
Š
IS_MAC_AUTH
— Set to "true" if the username from the switch is a MAC address (otherwise
unset)
Š IS_DOT1X
— Set to "true" if the username from the switch is not a MAC address (otherwise
unset)
Escape Sequences
Special characters can be included by escaping them as "\XXX" where XXX is an octal value
representing an ASCII character, or as "\uXXXX" where XXXX is a hexadecimal value
representing a unicode character.
Comments
Lines that start with the # character are ignored.
Examples
Initialization script:
expect Enter Ctrl-Y to begin.
send -noreturn \031
expect -ifset IS_TELNET Username:
send -ifset IS_TELNET ${USERNAME}
expect -ifset IS_TELNET Password:
send -ifset IS_TELNET ${PASSWORD}
expect press or to select option.