Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 47 / 534

System Configuration 47
no
vd
ocx
(e
n)
24
Ma
rch 20
09
Modify any of the following
Network settings
you want to change:
Š
Enter a new ES in the
Host name
text field. For example,
garp.mycompany.com
Š
Enter a new ES address in the
IP address
text field. For example,
192.168.153.35
Š
Enter a new netmask in the
Network mask
text field. For example,
255.255.255.0
Š
Enter a new gateway in the
Gateway IP address
text field. For example
192.168.153.2
Š Enter one or more DNS resolver IP addresses, separated by commas, semicolons, or spaces in
the
DNS IP addresses
text box. For example:
10.0.16.100,10.0.1.1
NOTE: The Novell ZENworks Network Access Control ESs host name must be a fully qualified
domain name (FQDN). For example, the FQDN should include the host and the domain name—
including the top-level domain.
For example, waldo.mycompany.com. Select names that are short, easy to remember, have no
spaces or underscores, and the first and last character cannot be a dash (-).
NOTE: You cannot change the ES IP address for a single-server installation. You can change the
MS IP address for a single-server installation.
3.4.5 Changing the ES Date and Time
To change the ES date and time:
Home window>>System configuration>>Enforcement clusters & servers>>Select an
ES>>Configuration
1 Select a Region from the
Region
drop-down list in the
Date and time
area.
2 Select a time zone from the
Time zone
drop-down list.
3 Click
ok.
NOTE: See Section 3.5.7, “Selecting the Time Zone,” on page 55 for information on changing the
time zone settings for the MS.
WARNING: Manually changing the date/time by a large amount (other than a time zone change)
will require a restart of all servers. Rolling back the clock will have adverse effects on the system.
3.4.6 Modifying the ES SNMP Settings
To change the ES SNMP settings:
Home window>>System configuration>>Enforcement clusters & servers>>Select an
ES>>Configuration
1 Select the
Enable SNMP
check box.