Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 142 / 534

142 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
TIP: To view access status, see Section 4.5, “Viewing Endpoint Access Status,” on page 147 .
Š Quarantined —
Š
By NAC Policy — The endpoint has been assigned a quarantined IP address. For
example, an endpoint could have been quarantined because it failed a test or it could not
be tested.
Š
By administrator — The administrator has selected
Temporarily quarantine
for
an assigned time frame.
Š
Post-connect — The endpoint has been assigned a quarantined IP address because a post-
connect service requested the quarantine.
Š Blacklisted — The endpoint has been assigned a quarantined IP address because it was
designated to always be quarantined in the
System
Configuration>>Exceptions>>Blacklist
window.
Š Awaiting quarantine — A temporary state indicating that an endpoint is in the process of
being quarantined.
Š
Granted access —
Š
By NAC Policy — The endpoint has been assigned a non-quarantined IP address. For
example, an endpoint could have access because it passed a test, or could not be tested but
is allowed access.
Š
Temporarily by NAC policy — The endpoint has been assigned a non-quarantined IP
address. For example, an endpoint could have access because it failed a test but was
allowed temporary access.
Š
By administrator — The administrator has selected
Temporarily grant access
and assigned a time frame.
Š By Access Mode — Endpoints are tested in allow all mode; however, they are always
given access to the production network.
Š
Whitelisted — The endpoint has been assigned a non-quarantined IP address because it
was designated to always have access in the
System
Configuration>>Exceptions>>Whitelist
window.
Š
Awaiting access — A temporary state indicating that an endpoint is in the process of being
allowed access.
Š
Disconnected — Novell ZENworks Network Access Control cannot communicate with the
endpoint.
4.3 Endpoint Test Status
Novell ZENworks Network Access Control provides on-going feedback on the test status of
endpoints in the left pane of the
Endpoint activity
window as follows:
TIP: To view access status, see Section 4.5, “Viewing Endpoint Access Status,” on page 147 .
Š
Failed — Novell ZENworks Network Access Control shows this status after the endpoint has
failed testing. Click on the plus (+) symbol to show the test failed categories.
Š Passed — Novell ZENworks Network Access Control shows this status after the endpoint has
passed the test and is connected to the network.