Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 163 / 534

End-user Access 163
no
vd
ocx
(e
n)
24
Ma
rch 20
09
Figure 5-2
Local Area Connection Properties
4 On the
General
tab, in the
This connection uses the following
area, verify
that
File and Printer sharing
is listed and that the check box is selected.
5 Click
OK
.
For more information on file and printer sharing, refer to the following:
Š
To configure File and Printer Sharing for Microsoft Networks — http://
www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/
howto_config_fileandprintsharing.mspx (http://www.microsoft.com/resources/documentation/
windows/xp/all/proddocs/en-us/howto_config_fileandprintsharing.mspx)
Š
To add a network component — http://www.microsoft.com/resources/documentation/
windows/xp/all/proddocs/en-us/howto_config_fileandprintsharing.mspx (http://
www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/
howto_config_fileandprintsharing.mspx)
Configuring Windows Vista for Agentless Testing
In order for a Windows Vista endpoint to be tested agentlessly, you must configure the following:
Š Network discovery — See the End-user Access chapter, Windows Endpoint Settings section
in the users guide.
Š
File sharing — See the End-user Access chapter, Windows Endpoint Settings section in the
users guide.
Š
Domain membership — Join the endpoint to a domain if it has not previously been a domain
member. Domain administrator credentials (rather than local administrator credentials) are
required for agentless testing.
To join a Windows Vista endpoint to a domain:
Home window>>System configuration>>Quarantining
1 Log in to the Windows Vista endpoint.