Nortel BCM 3.7, Руководство пользователя

Страница: 920 / 1004

920 P
N0008589 3.3
PCI
Peripheral Component Interconnect (PCI) slots are hardware sockets on a circuit board.
For instance, the Business Communications Manager has four PCI slots on the MSC
board. Each slot contains one PEC III card, which handles call processing for the system.
Peripheral Component Interconnect Slot
See PCI.
Permanent virtual circuit
See PVC.
Personal speed dial
These are two-digit codes between 71 and 94 that are assigned to specific telephones to
dial external numbers with just one button press. Configure speed dials under User
Preferences, User speed dials, Speed dial #XX. (Services, Telephony Services, System
DNs)
Phantom DNs
A Phantom DN is a DN record for a telephone that does not physically exist. You can
assign lines to the telephone that can be programmed to Appear and Ring. This allows you
to assign an Answer key from the non-existent telephone to an existing telephone. This
might be used in the case where a customer number has been changed, but the number still
gets used. Rather than assign a telephone to the line, you can create a phantom DN and
assign an Answer key to an active telephone.
pickup group
You can place a telephone into one of nine call pickup groups. You can pick up a call
ringing at a telephone within a pickup group from any telephone within the same pickup
group. Assign a telephone to a pickup group under Capabilities. (Services, Telephony
Services, System DNs)
pin-1
An indicator on the first pin on an electronic component. You use this indicator to help you
correctly align the component when attaching or installing it.
Point-to-point protocol
See PPP.
pool
See line pool.
port
A connector on the Business Communications Manager base unit that allows data
exchange with external devices, such as external page or music equipment or a serial cable
connection to a computer.