Nortel BCM 3.7, Руководство пользователя, Страница: 491 / 1004

Defining common schedule settings 491
Programming Operations Guide
Overriding services with a Control telephone
The control telephone can override services turned on and off according to a schedule by entering
a Services feature code, and then by selecting a different schedule. This override remains until
canceled. If you select a schedule with an asterisk (*), the next automatic service schedule comes
into effect at the programmed time.
Direct-dial telephone ringing service
Direct-dial calls to a direct-dial telephone ring at the extra dial telephone when you enter the
Ringing service feature code (
FEATURE 871 ) at that direct dial telephone. The installer assigns
the extra dial telephone. Note that only the extra dial telephone is activated, not the actual Ringing
service (unless that direct-dial telephone is a control telephone).
Defining common schedule settings
The Common settings heading allows you to define the common names and times for the services
schedules. You also define the service control password under this heading.
• “Defining the service control password” on page 491
• “Changing schedule names” on page 492
• “Changing schedule times” on page 493
Defining the service control password
Use these steps to locate and confirm or change the password users will need to access the services
feature from a control telephone to change Restriction or Routing service settings.
1 Click the keys beside Services , Telephony services , Scheduled services.
2
Click on Common settings .
Figure 169 Entering the Service control password
3
In the Service control password field, the default is set at 23646. You can change this, as
required.
!
Security note:
Change the default password once you have your system set up and have
tested the services features. Keep the password in a safe place.