Nortel BCM 3.7, Руководство пользователя

Страница: 581 / 1004

Identifying a Hunt group 581
Programming Operations Guide
Hunt group modes
The following three figures graphically demonstrate each of the three modes described in the
following table that are available to Hunt groups.
Figure 200 Broadcast call mode
Name <an alpha-numeric string
naming the Hunt Group> Provides a unique name for the Hunt Group. The default is HGxx,
where xx is the Hunt Group number 01-30.
Aux ringer Y or N Defines whether an auxiliary ringer (if installed) rings for incoming
calls to a hunt group (Y).
If set to N, the control of the auxiliary ringer falls back to control
defined on a per telephone or per line basis.
Distinct rings in
use read only This field indicates the distinct ring patterns are currently in effect,
if any, on any lines, telephones, or hunt groups on the system.
Distinct ring None
Pattern 2, 3 or 4
Select a ring pattern for the hunt group.
Default is None.
Warning:
If you assign a distinctive ring pattern for a Hunt Group, all calls offered to telephones in the
group will use the assigned ring pattern. If no pattern is assigned, or if the ring pattern is lower in
status than the ring pattern of the line or the telephone setting, the call will use the ring pattern
with the highest status setting.
Refer to the sections which describe configuring Lines and DNs for information about assigning
distinctive ring patterns to lines and telephones.
Table 132 Hunt group settings (Continued)
Field Values Description
!
"
#
$
%
!
"
#
$
%
!
"
#
$
%
!
"
#
$
%
!
"
#
$
%
!
"
#
$
%
Incoming
call
Call A
Call B
(All telephones ring or show an appearance of all calls)