Nortel BCM 3.7, Руководство пользователя, Страница: 449 / 1004

Setting up CAP stations 449
Programming Operations Guide
• If a CAP/KIM module is relocated with the telephone, the settings are retained.
• If you replace a legacy 7324+eCAP with a 7316E+eKIM, only the line assignments will be
copied to the new telephone, but not to the eKIM. The telephone programming will revert to the
default settings for other buttons. If you move an OKIM from one 7316E to another, the KIM
will retain memory button programming. However, if you move an eKIM from one 7316E to
another, programming will not follow.
Monitoring telephones with the CAP or KIM module
The indicators beside internal autodial buttons on your CAP module show the status of Norstar
telephones. KIM modules have a more graphic set of icons that indicate various call states. Refer
to the
Telephony Features Handbook for details about KIM icons.
Configuring a CAP or KIM module
If the telephone/module set is programmed as a CAP station, you can move lines onto the module
using
FEATURE *81 on the telephone. Refer to the Telephony Features Handbook for detailed
information about moving lines. You can also reassign Hunt group designators to the KIM module
by using the same feature.
You can also force lines onto the CAP/KIM by entering more lines than the telephone buttons can
support. Extra lines automatically flow over to the module, but they flow sequentially, starting on
the top left at button 01. Also, they overwrite any existing programming on the KIM, except
existing line or hunt group (KIM) assignments.
Any of the buttons on your CAP/KIM module that do not have assigned lines can be programmed
to dial internal or external numbers automatically, or to access a feature. Refer to
Programming
CAP/KIM buttons .
Programming CAP/KIM buttons
Designating features or autodial numbers to the eCAP/eKIM buttons can be performed using the
CAP/KIM button programming heading located under User Preferences .
You cannot assign lines, target lines, or Hunt group indicators using button programming. This
must be performed through adding lines to the telephone (
Assigning lines to telephones ), and, for
hunt groups, configuring the telephone as a Hunt group member ( “Adding a Hunt group member”
on page 583 ). These lines are then either moved to the modules or overflow to the module if the
telephone buttons cannot accommodate the number of lines.
To program the buttons, follow this procedure:
1
If you are not already in the DN record, click the key beside the telephone DN where you want
to program button features.
2
Click the key beside User preferences .