Nortel BCM 3.7, Руководство пользователя

Страница: 451 / 1004

Setting up CAP stations 451
Programming Operations Guide
Cold starting the KIM to erase programming
If your KIM fails, or if you want to erase programming on the KIM, there are two types of cold
start.
Note: If you are cold starting an eKIM that has line or Hunt group assignments, the cold start will
erase current programming, and insert the line appearances, starting with the top, left button. After
all the line appearances are assigned to lines, the system adds target line or Hunt Group
appearances. If any buttons are left, the system populates the buttons with autodialer assignments.
Use FEATURE *0 to view button assignments after a cold start.
For both types of cold starts:
1 Unplug and replug the 7316E line cable.
The telephone will restart and all the icons will flash. When the telephone icons stop flashing,
the KIM module icons start flashing.
2
At this point, do one of the following:
• KIM single-module cold start
If you just want to cold start an individual module, on that
module, simultaneously press the two top and two bottom
buttons on the lower button set, as shown in the diagram to the
left. The KIM displays a random pattern of icons as the KIM
resets.
• KIM multi-module cold start
If you want to cold start all the KIMs attached to your
telephone, simultaneously press the top two buttons on
the upper button set, and the bottom two buttons on the
lower button set, as shown in the diagram to the right.