manualshive.com logo in svg

Nortel BCM 3.7, Руководство пользователя, Страница: 645 / 1004

Поделиться
Скачать
Nortel BCM 3.7 Скачать руководство пользователя страница 645

Configuring a DHCP Server

645

Programming Operations Guide

5

Press the 

Tab

 key to save the settings.

6

Click the 

Summary

 tab.

The Summary screen appears. 

7

Configure the Summary settings according to the following. 

8

Press the 

Tab

 key to save the settings.

NORTEL IP 
Terminal VLAN Id

Allows you to specify the Virtual LAN (VLAN) ID numbers that are given to the IP telephones.

If you want DHCP to automatically assign VLAN IDs to the IP telephones, enter the VLAN IDs in 
the following format:

VLAN-A:id1,id2,...,idn.

 

where:

•

VLAN-A: — is an identifier that tells the IP telephone that this message is a VLAN discovery 
message.

•

id1,id2,...idn — are the VLAN ID numbers that DHCP can assign to the IP telephones.
You can have up to 10 VLAN ID numbers listed. The VLAN ID numbers must be a number 
from 0 to 4095.
For example, if you wanted to use VLAN IDs 1100, 1200, 1300 and 1400, you would enter the 
following string in this box: 

VLAN-A:1100,1200,1300,1400. 

If you do not want DHCP to automatically assign VLAN IDs to the IP telephones, enter 

VLAN-A:none.

 in this text box.

Note1

: The NORTEL IP Terminal VLAN Id string must be terminated with a period (.).

Note2

: If you do not know the VLAN ID, contact your network administrator.

Note3

: For information about how to setup a VLAN, refer to the user documentation that came 

with your VLAN compatible switch.

Note: 

When you change the published IP address of Business Communications 

Manager, you must reboot the IP telephones.

Note: 

Event logging is always on for DHCP server. The event information is 

recorded in the system admin log.

Table 158   

DHCP Summary settings

Setting

Definition

Description

Shows the a description of the DHCP service operating on Business Communications Manager.

Version

Shows the version number of the DHCP service.

Status

Allows you to enable or disable the DHCP server. When you disable the DHCP server, you need 
to assign static IP addresses to the clients or configure DHCP as a Relay Agent to use another 
DHCP server on the network.
The default is Disabled.

Table 157   

DHCP Global Options (Continued)

Setting

Definition

Содержание BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов