background image

399

Programming Operations Guide

Chapter 15
Configuring DNs for system devices

This section describes, in detail, the DN record screens that are used for configuring the telephones 
and equipment attached to the station modules on the Business Communications Manager 
screen-by-screen.

Refer also to the process map (

“Understanding the configuration process” on page 366

).

The Programming Records contain a number of forms for telephone programming. If you fill those 
forms out beforehand, you can easily create the templates and programming described in this 
section.

Task: 

To set up each telephone or device attached to your system:

• Copy settings from existing records: 

“Copying settings to other DNs” on page 401

• Configure each telephone record individually):

— Define the unique name for the telephone. 

(

“Identifying the telephone (General heading)” on page 403

).

— Assign lines or line pools to each telephone. 

(

“Configuring line access” on page 405

)

— Determine the Capabilities and User Preferences for each telephone, if 

applicable. (

“Defining device capabilities” on page 417

“Defining user 

preferences” on page 428

“Programming telephone buttons” on page 432

“Configuring user speed dialing” on page 444

)

— Determine the restrictions for each telephone. (

“Programming restrictions for 

DNs” on page 452

)

• Determine the call display and log options. (

“Configuring telco features” on page 456

)

• If you have optional voice mail active on your set, you will also see the active phone number 

for each telephone. (

“Voice Mail settings” on page 457

).

• If your attendants have 7316E+eKIM telephones, you need to assign these systems under 

“Setting up CAP stations” on page 446

.

Содержание BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы: