manualshive.com logo in svg

Nortel BCM 3.7, Руководство пользователя, Страница: 125 / 1004

Поделиться
Скачать
Nortel BCM 3.7 Скачать руководство пользователя страница 125

Managing access passwords

125

Programming Operations Guide

Password

<

maximum of 14 

characters long

>

Allows you to assign a password for the user. The password is case-sensitive 
and can be a maximum of 14 characters long.

Note:

•

Password length is determined by the Minimum Password Length setting 
in the Password policy table.

•

Passwords must contain elements from three of the four following 
character sets. This requirement can change, if you change the 

default

 

password policy complexity setting (

“Setting password policy” on page 

134

):

— upper case alphabet

— lower case alphabet

— westernized Arabic numerals

— nonalphanumeric characters ($, !, %, ^)

•

A user who fails to enter the correct password can be locked out of the 
system after a defined number of retries (account lockout threshold). For 
information about setting the lockout threshold, refer to 

“Setting password 

lockout policy” on page 132

.

Confirmed 
Password

Requires you to enter the same password again to validate the new or 
modified password.

Member of

AdminUserGroup

CDRUserGroup

DATAUserGroup

DialUpUserGroup

ReadOnlyUserGroup

VoiceUserGroup

Allows you to select the level of access associated with the user name.

The following levels of access are default settings:

AdminUserGroup:

 Can see and change any menu items (default).

CDRUser Group:

 Can see everything but cannot make changes. This user 

is restricted to accessing the CDRs. 

DATAUserGroup: 

Can only configure pre-defined data fields (default).

DialUpUserGroup:

 All menus are invisible, and no menus are configurable 

(default). This group allows the user to access the system through a dial-up 
connection. 

ReadOnlyUserGroup:

 Can see everything but cannot make changes 

(default).

VoiceUserGroup:

 Can only configure pre-defined voice fields (default).

Note: You cannot modify default user groups.

Dial-up note: 

If any of the users will be using a dial-up connection to access 

the system, they must be assigned to the DialUpUserGroup. 

For information about adding new groups, refer to 

“Adding or modifying a 

group profile” on page 128

.

Callback

Disabled/Enabled

If this user is going to use a dial-up connection to connect to the system and 
the user requires callback, ensure that Callback is enabled. If the user is 
configured as an ISDN interface, ensure that a static IP address has been 
specified for the interface. Refer to 

“Configuring an ISDN interface” on page 

696

.

If this user is not using a dial-up connection or does not require callback, set 
Callback to Disabled.

Note: The system supports one dial-up connection at a time.

Callback 
Number

This is the number the system uses to call back to the user’s dial-up location. 
Ensure that the appropriate routing codes are added to the dial string.

Table 5   

User Profile settings (Continued)

Attribute

Value

Description

Содержание BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов