manualshive.com logo in svg

Nortel BCM 3.7, Руководство пользователя, Страница: 47 / 1004

Поделиться
Скачать
Nortel BCM 3.7 Скачать руководство пользователя страница 47

47

Programming Operations Guide

Preface

This guide explains how to program your Business Communications Manager system. For more 
information about the Business Communications Manager document suite, refer to 

“Related 

publications” on page 56

.

This issue of the document reflects the added functionality built into the Business 
Communications Manager 3.7 release. The hardware, and new and updated features described in 
this and other documentation from this suite requires that your Business Communications 
Manager system is running release 3.7.

This section includes the following general information:

•

“Before you begin” on page 48

•

“Symbols used in this guide” on page 48

•

“Text conventions” on page 49

•

“About the buttons on your telephones” on page 49

•

“Acronyms used in this guide” on page 51

•

“Related publications” on page 56

•

“System documentation map” on page 57

•

“How to get help” on page 62

Warning: 

Ensure that you make a complete backup of your data before attempting to 

upgrade your system. Refer to the upgrade guide that comes with the upgrade package for 
instructions about upgrading the Business Communications Manager software from one 
version to another.

Note: 

The section “Software licensing” on page 3 contains software licensing 

information.

Note: 

Hardware:

 BCM200 and BCM400 hardware is shipped with 3.0 or newer 

software, only.

Note: 

Network:

 All the Business Communications Managers in your private network 

should be running the same level of software to ensure that remote gateways and other 
networking protocols are compatible. Meridian 1 systems connected to your network 
using Voice Over IP (VoIP) trunks must be running the ITP software. Ask your Meridian 
distributor for details. 
After you perform an upgrade, always check that your gateways are still correctly 
configured for local and remote connections.

Содержание BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов