Nortel BCM 3.7, Руководство пользователя

Страница: 221 / 1004

Make a call 221
Programming Operations Guide
Make a call
You can set up your system in several ways that will determine how users can make calls.
This section includes:
• “Emergency 911 dialing” on page 222
• “Select how you dial your calls” on page 222
• “Receive a busy signal on an internal call” on page 222
• “Create a conference call” on page 223
• “Time-saving features” on page 223
Some of the ways you can set up the system and the telephones to make calls includes:
• You can assign every line to every telephone, in which case, the user presses a line button or
intercom button to dial out a call.
• You can assign lines to pools (Line pool A to O and PRI pool A to F) and assign the pools to
all telephones. To make a call over line pools, users use the line pool feature code (
FEATURE
64 ) and then enter a line pool access code.
• You can assign line pools to routes and assign the routes with destination codes. To make calls
with destination codes, the user enters the destination code, and then dials out the required
digits to contact the destination telephone. The digits the users dial will depend on what the
destination code is, and what dial-out digits have been specified within the route record.
Note: All PRI line pools must be accessed through routes, using destination codes.
• If a prime line is specified for the telephone, the telephone will automatically dialout on this
line if an intercom button is pushed, or the handset is picked up.
• Auto dial: You can program an internal or remote dialout string onto a memory key. When the
user presses the key, the system automatically dials the digits stored on the button.
Programming : “Assigning line access” on page 406
Programming :
• “Assigning Trunk/line data” on page 248
• “Setting up line pool access codes” on page 328
Programming : “Configuring call routing” on page 331
Programming : “Assigning line access” on page 406
Programming : “Configuring buttons from the DN record” on page 433