Nortel BCM 3.7, Руководство пользователя

Страница: 212 / 1004

212 Name a telephone, a line or a Hunt group
N0008589 3.3
Name a telephone, a line or a Hunt group
You can assign names to identify external lines, target lines, and your colleagues’ telephones.
During a call, the name (if programmed) appears on the telephone display instead of on the
external line number or internal telephone number of the caller.
Names can contain both letters and numbers, but cannot be longer than seven characters. You
cannot use the # and * symbols.
Note: You can give the same name to a telephone and a line in your system. Use initials,
abbreviations, or even nicknames to give each telephone a unique name to avoid confusion.
You can also determine if the calling line ID (CLID) is received by a telephone, or if the CLID
information from a system telephone gets sent out over the network. Refer to
“Incoming and
outgoing call display” on page 213 .
Programming :
• Name a line/target line: “Using the General record” on page 247
(Services, Telephony Services, Lines)
• Name a telephone: “Identifying the telephone (General heading)” on page 403
(Services, Telephony Services, System DNs)
• Name a hunt group: “Identifying a Hunt group” on page 579
(Services, Telephony Services, Hunt Groups)
• Determine what displays first: “Configuring telco features” on page 456 (First
display)
K9 Unit
Target line
Trunks
Public or
Private
network
5553465
K9 Unit
Naming components in the system
K9help
Hunt group