Nortel BCM 3.7, Руководство пользователя

Страница: 480 / 1004

480 Setting system timers
N0008589 3.3
3
The possible settings are described in the following table.
Table 100 Timer values
Attribute Values Description
Camp timeout 30, 45, 60, 90,120, 150
or 180 seconds Assign the number of seconds before an unanswered camped call
returns to the telephone that camped the call.
Park timeout 30, 45, 60, 90, 120, 150,
180, 300 or 600 seconds Assign the number of seconds before a parked call on an external line
returns to the telephone which parked the call. This interval is used for
SWCA lines as well.
Page timeout 15, 30, 60, 120, 180,
300, 600 2700 seconds Define the period of time after which the paging feature automatically
disconnects.
Transfer
callback timeout Off
after 3 rings
after 4 rings
after 5 rings
after 6 rings
after 12 rings Specify the number of rings before a callback occurs on a transferred
call. You can estimate the delay in seconds if you multiply the number of
rings by six.
Note: This setting can affect transferred calls from voice mail and should
be configured accordingly.
Host delay 200, 400, 600, 800,
1000, 1200, 1400, 1600,
1800 or 2000
milliseconds Assign the delay between the moment an outgoing line is selected to
make an external call (for example, by lifting the receiver off the
telephone) and the moment that Business Communications Manager
sends dialed digits or codes on the line.This ensures that a dial tone is
present before the dialing sequence is sent. Minimizing this delay
provides faster access to the requested features.
Link time 100, 200, 300, 400, 500,
600, 700, 800, 900 or
1000 milliseconds Specify the duration of a signal required to access a feature through a
remote system.
The Link time depends on the requirements of the host switching
system. For example, to program external dialing through a Centrex
system requires a Link time of 400 ms.
Link is another name for recall or flash.
*Network
Callback Timer <XX seconds> This timeout value determines when a transfer attempt will stop and then
attempt a retry of the transfer.
*Not available in all region profiles.