Nortel BCM 3.7 Скачать руководство пользователя страница 603

Страница: 603 / 1004

Using the Hospitality services room telephone

603

Programming Operations Guide

To program the Alarm time feature on an analog telephone:

Press

FEATURE 875

A tone sounds.

Enter a four-digit alarm time.

When using the 24-hour clock format (hour: 00 to 23 and minutes: 00 to 59), a tone sounds.

When using the 12-hour format, press

to select am, or

to select pm. A tone sounds.

At the assigned times, the telephone in the room rings to wake up or remind the occupant of
the next event or meeting.

Change or cancel an alarm time

When you enter a new Alarm time it overwrites any times previously assigned.

You can also cancel the alarm time feature. If you cancel the Alarm time for any set, it cancels the
Alarm time for all the sets in the same room.

•

Press

FEATURE #875

to cancel the Alarm time on a telephone with a display.

The display shows

Alarm OFF

•

Press

LINK *875

to cancel the Alarm time on an analog phone or a 7000 digital phone.

Turn off an alarm

To release a ringing alarm:

•

On a telephone with a display, press any button except the

HOLD

button.

•

On an analog telephone, lift the handset and then hang up.

Note:

If the user presses the

HOLD

button when the set rings, it temporarily deactivates the

Alarm. After a number of minutes, the set will ring again.
If the user is on a call when the alarm rings, press any button except

RELEASE

to cancel the

alarm and maintain the active call.

Содержание BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание BCM 3.7

Отзывы:

Nortel BCM 3.7, Руководство пользователя, Страница: 603 / 1004

Результаты поиска

Содержание BCM 3.7

Отзывы: