Nortel BCM 3.7, Руководство пользователя

Страница: 466 / 1004

466 Programming Feature settings
N0008589 3.3
Table 96 Set feature values
Attribute Value Description
Background music Y or N Allows you to listen to music through your telephone speaker
after pressing
FEATURE 86 on your telephone. A music
source must be connected to Business Communications
Manager or IP music must be configured.
Refer to “Background and on-hold music sourcing” on page
468 .
On hold Tones
Music
Silence
Allows you to choose what a caller hears on an external line
when the line is put on hold.
Tones provides a periodic tone.
Music provides any signal from a source such as a radio
connected to Business Communications Manager or
streaming audio, using the IP Music feature.
“Background and
on-hold music sourcing” on page 468
Silence provides no audio feedback.
Receiver volume Use sys volume
Use set volume
Allows you to specify if the volume level of a receiver or
headset returns to the system default level when a call ends or
is put on hold, or if it remains at the volume level set at the
individual telephone.
Park mode Lowest
Cycle
Allows you to determine how the system assigns a retrieval
code to parked calls.
Lowest , the system chooses the lowest code that is available
when the call is parked.
Cycle , the system will choose the codes in a sequence, from
lowest to highest, until all the codes have been used, then start
at the lowest code again.
Delayed Ring Transfer Off
After 1 ring
After 2 rings
After 3 rings
After 4 rings
After 6 rings
After 10 rings Defines whether unanswered external calls are automatically
forwarded to a prime telephone after this timer expires.
You must assign a prime telephone for this feature to operate.
Refer to
“Assigning Trunk/line data” on page 248 .
Held line reminder Off
Immediate
After 30 seconds
After 60 seconds
After 90 seconds
After 120 seconds
After 150 seconds
After 180 seconds
Reminds you that an external call at your telephone is still on
Hold. You periodically hear two tones from your telephone until
you take the call off Hold.
Note: These tones can be heard by the caller.
Directed pickup Y or N Y (yes) allows anyone to answer any calls by specifying the
internal number (DN), where the call is ringing.
Directed pickup is useful when not all the telephones have the
same lines, but you want to allow co-workers to answer a call
on any external line.
Note: Do not confuse Directed pickup with the Group pickup
feature. Group pickup allows you to answer a call at any
telephone within a specific group without specifying the
internal number (DN) of the ringing telephone.
Page tone Y or N Y (yes) determines that a tone sounds before a page begins.
Note
: This tone is not heard over external page ports.