manualshive.com logo in svg

Nortel BCM 3.7, Руководство пользователя, Страница: 67 / 1004

Поделиться
Скачать
Nortel BCM 3.7 Скачать руководство пользователя страница 67

Logging on to Unified Manager

67

Programming Operations Guide

Using a HTTP Proxy server

Unified Manager does not work properly if you use a HTTP Proxy server to connect to the 
Internet. If you use an HTTP Proxy server, you must change your web browser settings so you can 
bypass the Proxy Server when connecting to Business Communications Manager. Proxy 
information is located under the internet options/preferences area of your browser.

Note:

 If the Business Communications Manager system is located outside of your network, or you 

have to use a proxy as a gateway proxy to communicate with Business Communications Manager, 
this process may not work. To bypass the proxy through the browser, the gateway proxy must be 
able to understand and pass distributed component object model (DCOM) calls between Business 
Communications Manager and the computer you are using to access Unified Manager.

Logging on to Unified Manager

Use the following procedure to log on to Business Communications Manager using the web 
browser:

1

Launch your web browser.

2

BCM 3.7 software provides two ways to access the Unified Manager: 

•

If you updated from a previous version of software, and you have the Business 
Communications Manager address (http://<

IP address

>:6800) bookmarked, you will find 

that the login is redirected to an https:// entry.

•

If you have a new system, enter https//:<

IP Address

>.

Note:

 You must include 

https://

 with the address to access Unified Manager when you are 

using Internet Explorer as your browser.

Note:

 If your Business Communications Manager has a network Fully Qualified Domain 

Name (FQDN), you can access your system by pointing your browser to that name.

3

If the browser does not automatically launch, click on the 

Go

 tab beside the URL address 

field.
A security dialog appears.

!

Security note: 

The default security certificate that comes with BCM 3.7 version 

software is a self-signed certificate that enables SSL encryption functionality. The default 
certificate does not address site authentication since site authentication requires site and 
system-specific information such as IP address, company name, and so on. Refer to 

“Understanding BCM SSL certificate properties” on page 68

 for more information.

Содержание BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов