Nortel BCM 3.7, Руководство пользователя

Страница: 342 / 1004

342 Configuring destination codes with wild cards
N0008589 3.3
If you use the wild card character A ( ANY), you can reduce the number of destination codes you
require to two, as shown in the following table.
Configuring destination codes with wild cards
Create the routes with dialout strings containing the common digits, then follow these steps to
create a destination code with a wild card character.
Create the destination code
1
Click on the keys beside Services , Telephony Services , Call Routing .
2 Click on Destination codes .
3
Click on the Add button .
The Destination code dialog box appears.
4
Enter a destination code, typing the letter A for the last digit of the code.
0623 555 3 0162 237 6253
0624 555 3 0162 237 6254
0625 555 3 0162 237 6255
0626 555 3 0162 237 6256
0627 565 All 0173 133 2211
0628 555 3 0162 237 6258
0629 555 3 0162 237 6259
Table 66 Destination codes using the ANY character
Destination codes Route AbsorbLength Dial Out
062A 555 3 0162 237 625X
where
X
is the last digit of the destination code
dialed out, from 1 to 9, but not 7
0627 565 All 0173 133 2211
Tips
The digit absorption setting (absorbed length) applies to a maximum of two schedules. To
minimize the effort involved in preparing destination codes, set the digit absorption to 0.
With set to 0, the actual digits dialed by a caller are preserved in the dial out sequence. The
need to program a dial out sequence as part of the route depends on the required dialout.
Table 65 Destination codes not using a wild card (Continued)
Destination codes Route Absorb Length Dial Out