manualshive.com logo in svg

Nortel BCM 3.7, Руководство пользователя, Страница: 454 / 1004

Поделиться
Скачать
Nortel BCM 3.7 Скачать руководство пользователя страница 454

454

Programming restrictions for DNs

N0008589   3.3

ISDN terminals/cordless handsets notes:

• Set lock is not supported.

• Allowed last number redial is supported on some handsets. Refer to the user manual for your 

telephone.

• Allowed saved number redial is not supported

• Allow link is supported on some sets. Refer to the user manual for your telephone.

Setting restriction schedules for telephones

You can assign a different restriction filter for normal service and for each of six other schedules. 
See 

“Defining service schedules” on page 495

 for more information about the schedules.

Follow these steps to configure Set Restriction schedules:

1

If you are not already in the DN record, click the key beside the telephone DN for which you 
want to assign set restrictions schedules.

2

Click on the keys beside 

Restrictions, Set restrictions, Schedules

.

3

Click on the schedule you want to program. For example, 

Evening

.

Figure 154   

Defining set restrictions for the Night schedule

4

In the 

Use filter

 box, type in the number of the restriction filter you want to assign to the 

telephone. 
Refer to the table below for a list of default settings.

For example, if you enter a set of restrictions for filter 11, the restrictions will automatically apply 
for the Night schedule.

Table 92   

Schedule filter defaults

Schedule

Restriction 
filter (defaults)

Schedule

Restriction 
filter (defaults)

Normal

02

Schedule 4

00

Schedule 1 (Night)

11

Schedule 5

00

Schedule 2 (Evening) 12

Schedule 6

00

Schedule 3 (Lunch)

13

Содержание BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов