manualshive.com logo in svg

Nortel BCM 3.7, Руководство пользователя, Страница: 3 / 1004

Поделиться
Скачать
Nortel BCM 3.7 Скачать руководство пользователя страница 3

Software licensing

3

Programming Operations Guide

Software licensing

The Apache Software License, Version 1.1

Copyright (c) 2000-2002 The Apache Software Foundation. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:

1

Redistributions of source code must retain the above copyright notice, this list of conditions 
and the following disclaimer.

2

Redistributions in binary form must reproduce the above copyright notice, this list of 
conditions and the following disclaimer in the documentation and/or other materials provided 
with the distribution.

3

The end-user documentation included with the redistribution, if any, must include the 
following acknowledgment: “This product includes software developed by the Apache 
Software Foundation (http://www.apache.org/).”

Alternately, this acknowledgment may appear in the software itself, if and wherever such 
third-party acknowledgments normally appear.

4

The names “Apache” and “Apache Software Foundation” must not be used to endorse or 
promote products derived from this software without prior written permission. For written 
permission, please contact [email protected].

5

Products derived from this software may not be called “Apache”, nor may “Apache” appear in 
their name, without prior written permission of the Apache Software Foundation.

THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

====================================================================

This software consists of voluntary contributions made by many individuals on behalf of the 
Apache Software Foundation. For more information on the Apache Software Foundation, please 
see <http://www.apache.org/>.

Portions of this software are based upon public domain software originally written at the National 
Center for Supercomputing Applications, University of Illinois, Urbana-Champaign.

Содержание BCM 3.7













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов