Nortel BCM 3.7, Руководство пользователя

Страница: 410 / 1004

410 Determining line assignments
N0008589 3.3
Assigning lines to telephones
Follow these steps to assign lines to telephones:
1 If you are not already in the DN record, click the telephone DN to which you want to assign a
trunk or line.
2 Choose Line access . Click on the Line assignment heading.
3
Click the Add button.
4 Type a line number in the Line box.
5
Click the Save button.
6 On the navigation tree, click the Line nnn you just created.
7
Use the following table to define the line for the telephone.
Table 78 Telephone line assignment fields
Attribute Values Description
Appearance type Ring only, Appear &
Ring, Appear only Select how a call on this line shows on the telephone.
If you choose Appear&Ring or Appear only , you can have as
many simultaneous DID calls as there are target line button
appearances.
If you choose Ring only , you can have as many simultaneous DID
calls as you have intercom buttons.
Note: The Business Communications Manager does not
support a mixture of Appear only and Ring only appearances
for the same line.
7000 or 7100 digital phones, the 2001 IP telephone default to Ring
Only.
Appearances
(for target lines, only)
<1-10> Select the number of appearances of a target line.
Note: The number of appearances that can actually be assigned to
a telephone, depends on how many buttons with indicators are
available. Target line appearances cannot overwrite other line
appearances, Answer DNs, Intercom buttons or and assigned
Handsfree button.
Caller ID set Y or N Choosing Y enables the telephone to display call information on the
telephone display, when it is available for a call. This setting also is
used in conjunction with other settings to create the alpha tagging
feature. Refer to
“Using alpha tagging for name display” on page
463 .
Choosing N disables the telephone from receiving call display
information. Choose this setting if the telephone does not have a
display, or if you do not want call information displayed to the user.
Disabling this function can reduce system resource requirements.
Note 1 : This prompt only appears for target lines, and any analog
lines that provide CLID through an GASM (North America only).
Note 2 : This prompt is not supported for analog lines in the global
market.
Limitation: Only 30 telephones can have this field enabled for any
given line.