Nortel BCM 3.7, Руководство пользователя

Страница: 549 / 1004

ETSI Euro network services 549
Programming Operations Guide
The following table lists the settings for some of the hardware parameters for ETSI QSIG
networking example shown above.
ETSI Euro network services
If your system has ETSI ISDN BRI/PRI lines, you can activate the malicious call identification
(MCID) and Network Diversion features. Advice of charge-end call (AOCE) is active if your
service provider has activated that service on the line.
When the features are activated, users can:
• display a call charge
• redirect calls over the ETSI ISDN BRI/PRI line to the outside network
• tag malicious calls
Advice of Charge-End of Call (AOCE) — AOCE is a supplementary service available from your
service provider on ETSI ISDN BRI/PRI links. This feature allows the Business Communications
Manager user to view the charges for an outgoing call once the call completes. This information is
also reported to the Call Detail Reporting Application. The information can be provided in
currency or charging units, depending on how the feature is set up by your service provider.
To invoke the feature, the user presses FEATURE 818 .
To set up MCID and network diversion, you can access the Network Services heading on the
Unified Manager, as described in these steps:
1
Click the keys beside Services , Telephony services , General settings, and
Network services .
2
Click on ETSI .
3 The following table lists the possible values for ETSI.
The
Description column of the table describes the feature and how the user activates each
feature from their telephone.
Table 126 Hardware programming for branch offices
West End office: East End office:
Hardware
programming DTM/BRIM PRI/BRI Hardware
programming DTM/BRIM PRI/BRI
Protocol ETSI QSIG Protocol ETSI QSIG
BchanSeq Ascend
(PRI only) BchanSeq Ascend
(PRI only)
ClockSrc Primary ClockSrc Primary