Nortel BCM 3.7, Руководство пользователя

Страница: 498 / 1004

498 Configuring ringing service
N0008589 3.3
Assigning ringing groups to lines
Each line must be assigned a Ringing service for ring group and auxiliary ringer.
Note: If the lines are not set up yet, skip this step until you have defined all the lines.
1
Within each ring schedule, click on the key beside Line settings to display the list of lines.
2 Click on each line in turn, or a specific line you want to adjust.
Figure 174 Defining ring service schedule line settings
3
The following table shows the possible settings for each schedule day.
Trunk answer Y or N Trunk answer allows you to answer, from any telephone, an external call that is
ringing at another telephone in your office if the Ringing Service is active on that
line at the time of the call. If the service is not active, you cannot answer the call.
This is useful if the other telephones are not assigned the same lines as the
telephone you are using to answer the call.
Note: You can change the Trunk Answer setting only if Ringing service is set to
Manual or Automatic.
Extra dial set None
DN <XX>
DN <control set>
The Extra dial set attribute allows you to assign an additional telephone to
receive calls for each schedule.
Note: The extra dial set is activated during a schedule by entering the Ringing
service feature code from the assigned direct-dial telephone. This does not
activate the Ringing service unless the direct-dial telephone is also a control set.
Refer also to “Creating Direct Dial sets” on page 324 .
Doorphone note: Ensure that this DN does not belong to a doorphone.
Table 108 Ringing group schedule line values
Attribute Value Description
Ring group Ring group <XXX> Type in a ring group number (001-100) to choose a different ring group
assignment.
Only one ring group can be assigned to a line for each schedule. To combine
groups of ringing sets, you must create a new ring group which contains all
the sets you want to ring and assign it to the line.
Table 107 Ringing group schedule values (Continued)
Attribute Value Description
...
Line 492