Nortel BCM 3.7, Руководство пользователя, Страница: 247 / 1004

Using the General record 247
Programming Operations Guide
Using the General record
The Lines XXX General record allows you to assign a name, a control telephone, and a remote
package for a line.
1 Choose the type of line with which you want to work.
2
Under that heading, choose the line number record you want configure.
3 Click General .
Figure 56 Using the Lines General screen
4
Change the headings to fit your requirements.
The following table shows the possible settings for the General record.
Table 31 General record values
Attribute Value Description
Name <maximum of seven
alphanumeric characters> Identify the line in a way that is meaningful to your system, such as
by the type of line and line pool or the DN it is attached to in the
case of target line
s .
Control set DN <control telephone DN>
Default: 221 (default Start DN)
Enter a telephone DN for a telephone that you want to use to turn
service off or on for other telephones using this line.
The control telephone must have the line assigned, or must be
assigned to the line pool the line is in. Refer to
“Assigning line pool
access” on page 414
Tips: External lines and telephones must be programmed to use one of the Scheduled Services:
Ringing, Restriction, and Routing Services.
For maximum flexibility, Nortel Networks recommends that you create two different control
telephones, one for the lines and one for the telephones.
You can turn on a service manually or automatically for all external lines from an assigned control
telephone. However, you cannot combine schedules. A service can only be active as normal
service or one of the six schedules at any one time. Several schedules can be active at one time,
but they must use different services.
Use remote
package <two-digit remote package
number> Package 00: Prohibits remote access to:
•
line pools
• external page
This package cannot be changed.
Package 01-15 are programmable.
Refer to
“Defining remote access packages” on page 304
*
Target lines are incoming, only.
They do not show this field.
*