Nordson 303 779B, Руководство пользователя по изделию

Страница: 85 / 176

Maintenance
B 4-1
E
1998 Nordson Corporation
All rights reserved
303 779B
Issued 11/98
Manual 12-44
Section B 4
Maintenance
WARNING: Allow only qualified personnel to perform the
following tasks. Follow the safety instructions in this document
and all other related documentation.
Enter the any access code in the system. The Maintenance Status
window appears.
This window shows the required routine maintenance and the run time
hours since the maintenance was last performed. This screen will look
slightly different with different system configurations. To perform the
maintenance:
1. Select the item from the menu and follow the instructions on the
screen or in this manual.
2. After completing the maintenance, select PERFORMED; the system
will move to the Maintenance Status window and zero the run hours
for that maintenance.
3. If the maintenance is not completed, select NOT PERFORMED; this
will also move the system to the Maintenance Status window without
zeroing the run hours for that maintenance.
The following are the daily maintenance procedures.
1. Use a clean cloth to remove any accumulation of dust and dirt from
the monitor. Apply the glass cleaner to a cloth and then wipe the
monitor. Use a glass cleaner to clean the computer monitor.
NOTE: Do not spray the monitor directly with glass cleaner. Never
use abrasive or caustic solvents.
1. Operator Maintenance
Daily Operator Maintenance