NEC ZA-SA3500G, Руководство по эксплуатации функций

Страница: 291 / 359

| Setting/Setting Confirmation 291
[Manual registration]

When manually registering a terminal, prepare the MAC address of the terminal to be registered.
Also, values must be entered in either “ Comment ” , “ Mail ” , or “ Statistics ”
[When 100 devices are already displayed in the device list]

Click the "Clear" button of the terminal that needs to be deleted from the device list. Then, click the "Show"
button of the access history to display the device list that accessed this product. Select the MAC address that
needs to be added from the list and click the "Add" button.

Click the "Clear" button of the terminal that needs to be deleted from the device list. Enter the MAC address,
comment, e-mail address, statistical information of the terminal to be registered and click the "Set" button.
[Delete device]
Since this product is a security device, it holds information on the device where communication is detected during
operation of this product. To delete a device from the device list, follow the procedure below.
1. Disconnect the device to be deleted from this product.
2. Open the [Device Manager] screen from [TOP]-[Network Topology].
3. Uncheck the "Enable Auto Registration Device to Statistics Target list" checkbox.
4. Click the "Clear" button on the line of the device you want to delete.
5. Click the "Apply" button.
6. Click the "Save" button to save the setting.
7. Restart this product by the OFF/ON button or [TOP]-[Maintenance]-[Maintenance]-[Restart] screen.
[Note]
If the number of registered terminals is large, it may take time to display.