CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 207
Command script interface allows an external application to communicate with the
2000 IPS system via MATWorX based on the PBX script data. The external
application is System Programming Assistant (SPA) which is developed by PBC. This
application complements the MATWorX to provide GUI-based system data
programming.
Release 12.2:
MATWorX IPS Ver. 11.6.0
The list of MATWorX Add-Ins, which is enhanced to support the R12.2 related features:
Service Restriction Add-in
Station Assignment Add-in
Station Data Copy / Move / Swap Add-in
Digit Conversion Add-in
Numbering Plan Add-in
Traffic Measurement Add-in
Office Data Save / Load / Verify Add-in
Trunk Route Add-in
Setting System Accommodation Data Add-in
MOC Mode Add-in
MATWorX PC Requirements:
Minimum Requirements
Recommended Configuration
CPU
Pentium II 350MHz
Pentium IV 1GHz
RAM
128MB
256MB
Hard Disk
230MB or more
Monitor
SVGA (800 x 600)
High Color (16 bit)
SVGA (1024 x 768)
True Color (32 bit)
15-inch or larger monitor
Peripherals
CD-ROM drive, Keyboard, MouseRS-232C or LAN interface
Operating System
Microsoft Windows Me, Windows 2000,
Windows XP, Windows 2003
(Latest Service Pack (SP) should be applied)
6.5.4.4 Traffic management
The SOPHO 2000 IPS provides traffic management reports to be used for overall analysis
of system performance. MATWorX is used to request and display the type of report,
sample measurement time period, and time increments of reports. There are over twenty
types of reports.
6.5.4.5 Remote Maintenance
This feature allows station and trunk changes or reassignments to be performed without a
site visit by service personnel, and can be used to retrieve fault codes prior to visiting a
site. One Remote Maintenance center can service an unlimited amount of systems, thus
reducing the amount of personnel to maintain each site, travel costs and customer billing
for each site.
Service Conditions
1. The following additional equipment is required for this feature: