CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 146
Delayed Hotline (R12.2)
When a station user goes off-hook and waits for a pre-programmed time without dialling,
the station user is automatically routed to a predetermined station or an operator (Desk
Console). If the station user dials a number before the pre-programmed time, the station
user can make a call as usual.
Max. 100 stations can be assigned for the delayed hotline stations (including normal
hotline stations).
Analogue single line telephones, Dterm and Dterm IP can be configured as delayed
hotline stations.
Lobby telephones in hotels or hospitals are typical applications of the delayed hotline
feature. If a visitor knows a station number, he/she can make a call by dialling that
station number. If the visitor does not know the station number, he/she waits for a short
time period, and is then automatically routed to an operator or the reception.
Desk Console: Lockout operation (R9)
This enhancement allows the Desk Console to be set into a lockout mode (by the softkey
operation). This disables the console from making or receiving calls and setting or
canceling service features. To return the Console to its manual operating condition, a
password is required.
Notes
1. The lengh of the password can be up to 8 digits (combination of 0 to 9, * and #).
2. The password is assigned by the MAT or CAT.
3. The lockout status is cleared when the system power failure or MP/FP reset is
occurred.
4. Day/Night mode change by pressing the Night key on the Desk Console is restricted
during the lockout mode.
Required Software and Hardware:
-
SN753 DESKCON
Diagnostics
To assist maintenance personnel, the SOPHO 2000 IPS provides diagnostic capabilities
such as fault code generation, device status information and alarm information recording
which can be accessed from the Maintenance Administration Terminal (MAT) or
Customer Administration Terminal (CAT).
Dial by Name
This feature allows a Multiline Terminal user to search for a desired number by name.
The number and name are registered in the system and they are shown on Multiline
Terminal LCD. The Multiline Terminal user can search for the desired number by name
using up or down soft keys. When the Multiline Terminal user finds the desired number,
the call can be originated by pressing the Line/Trunk key or going off hook.
Erase Directory Entry (R12.2
)
Prior to R12.2, a Dterm user can add and modify his directory data from the telephone set.
In R12.2 software, the Dterm user can erase the directory data from the telephone set.
This is effective for station-based directory data only (system-based directory data cannot
be added, modified and erased from the telephone set).
Character Deletion (R12.2)
