CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 190
5.3 ISDN FEATURES
5.3.1 ISDN interfaces
Two standard ISDN interface cards for the 2000 IPS are available:
The Digital Trunk Interface card with D-channel Handler provides a single
30B+D circuit for ISDN PRI.
The Basic Rate Interface Trunk Card supports 4 two-channel PCM digital lines
(2B+D) for ISDN BRI.
Required Hardware and Software
The following hardware is required for the support of the above functionality:
R8:
-
SPN-30PRTA-B (AP)
-
SPN-4BRTA-D (AP)
R10:
-
SPN-30PRTA-C (AP)
-
SPN-4BRTA-E (AP)
5.3.2 Overview of ISDN features
On these interfaces the following ISDN services will be supported
(according to the ETSI specs):
From release
Basic call
6.2
Calling Line Identification Presentation (CLIP)
6.2
Calling Line Identification Restriction (CLIR)
6.2
Advice of charge end of call (AOC-E) for NL, DE, IT; AT, CH,
DK; GR, LUX, PT, ES, SE
8; 9; 10
AOC-E Output to PMS or SMDR Interface
12.2
Overlap Receiving
6.2
Overlap Sending
8
Addressing (support of E.164 numbering plan as Type of Number /
Numbering Plan Identifier combination)
8
Connected Line Identification Presentation (COLP)
8
Connected Line Identification Restrictions (COLR)
8
B-channel negotiation
8
Completion of Calls to Busy Subscriber (CCBS)
12.3
Addressing
This supplementary service supports E.164 numbering plan as TON (Type of Number) /
NPI (Numbering Plan Identifier) combination in Calling and Called Party Number IE
(Information Element) for outgoing calls. It adds trunk access -, national access - and
international access code to the calling party numbers in the callers list
Advice of Charge at the End of the call (AOC-E) has become available for the following
country specific implementations: Austria, Belgium, Denmark, Germany, Greece, Italy,
Luxemburg, Netherlands, Portugal, Spain, Sweden and Switzerland. The other European
countries must set to "Germany" because this country uses the standard implementation of
