CHAPTER 3 TERMINALS
Issue 5
UNIVERGE NEAX 2000 IPS General Description
Page 160
From R12.1 software, 2000 IPS supports basic Mobility Access (MA) feature including
enquiry calls and activation/deactivation by user, with enhancements in R12.2 for Call
Forwarding and CLI (this feature is equivalent of SOPHO Mobility Access (SMA) in
iS3000).
Required license: Mobility Access License (8 seats)
Activation/deactivation of MA feature from MA station (R21.1)
The MA feature can be activated/deactivated from a MA station telephone. The MA
station dials access code for MA activation/deactivation or press the MA
activation/deactivation feature button on Dterm, dials pa MA station number.
During the MA feature is activated, the lamp on the MA feature button is lit.
Activation/deactivation of MA feature from remote telephone (R21.1)
The MA feature can be activated/deactivated from a remote telephone. The remote user
dials DDI number for SMA activation/deactivation, dials pa MA station number.
Call from MA user - DTMF based (R21.1)
Remote MA user can access to internal PBX station and external party (via PBX), like
DISA feature. The MA user dials DDI number for MA access, receive dial tone, then
dials desired internal station number or external party number using DTMF. CLI display
on the internal station shows the MA station number. CLI display on the external party
shows the CLI number of the MA station.
Calls towards MA user (R21.1)
When an internal station or external party makes a call to a MA station, the call is
forwarded to a remote MA user. CLI display on the MA user telephone shows the CLI of
the MA station number.
Call Forwarding – All Calls set/cancel from a remote MA user (R12.2)
A remote MA-user can activate/deactivate the “Call Forwarding – All Calls” feature for
his/her MA station. In this case, the call towards the MA station is forwarded to the Call
Forwarding – All Calls destination, instead of forwarded to the remote MA user.
Cal Forwarding – Busy when a remote MA user is busy or out of radio zone (R12.2)
When a remote MA user is busy or out of radio zone, a call towards the MA user can be
forwarded to a Call Forwarding – Busy destination, if it is set for the MA station.
Enquiry calls - triggered by second call, without GSM arrangement (R21.1)
A remote MA user (GSM phone) can activate an enquiry call (triggered by second call)
during the conversation of a MA call:
1. During the conversation of a MA call, the MA user press CALL button.
2. The internal station user is placed on consultation hold by GSM network.
3. The MA user dials a DDI number for MA access.
4. The PBX checks the CLI of the incoming call and recognizes this is the second call
from the same MA user
5. The PBX disconnects the second call and places the first MA call on consultation
hold.
6. The MA user dials desired station/external party number for enquiry.
