![NEC SOPHO 2000 IPS DM Скачать руководство пользователя страница 34](http://html.mh-extra.com/html/nec/sopho-2000-ips-dm/sopho-2000-ips-dm_user-manual_248256034.webp)
General Product Description
Sopho 2000IPS
Release 12.2, August 2006
NEC Philips Unified Solutions
UPD
34 of 259
© NEC Philips Unified Solutions, 2006. All right reserved.
Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
2.3.2 Battery Module (BATTMH)
The BATTMH is an optional module for installing optional long-term (about 3 hours)
backup batteries. The BATTMH is designed to accommodate batteries covering up to one
stack of a 4-PIM system (2 BATTMHs support maximum system configuration).
The BATTMH is available for Floor Standing Installation. When the system is Wall-
mounting/19 inch Rack-mounting configuration, the BATTMH cannot be installed with
the PIM.
2.3.3 Installation Hardware
Base/Top Assembly
(1 per stack)
The Base/Top Assembly includes a Base Unit and a Top Cover
for the PIM. One Base/Top Assembly is required for each PIM
stack. The Base Unit also serves as the AC power distribution
panel for up to a four PIM configuration.
Hanger Assembly
(1 per PIM)
The Hanger Assembly is used for Wall-mounting Installation.
One set of Hanger Assembly is required for each PIM.
19 inch Bracket
(A: 1 per PIM)
(B: 1 per stack)
The 19-inch Bracket is a set of hardware used for 19-inch
Rack-mounting Installation.
The 19-INCH RACK BRACKET (A) is installed on both sides
of the PIM. One set of 19 inch Bracket (A) is required for each
PIM.
The 19-INCH RACK BRACKET (B) is installed at the BASE
of stack. One 19-INCH BRACKET (B) is required for each
stack.
If the system is 2 PIM or more configurations with 19-INCH
BRACKET (B), one set of 19-INCH BRACKET (A) is also
required for the topmost PIM.
Mounting Bracket
(Optional 1 per stack)
This is used for Floor Standing Installation. Without Mounting
Bracket, 1.1 G shockproof is provided for 1 to 3-module stack
and 0.5G shockproof is provided for 4 or more module stack.
To enhance the shockproof capability to 1.1 G, one set of
Mounting Bracket is required for each 4 or more module stack
and attached to the topmost PIM.
I/F Bracket
(Optional 1 per
system)
This is used for Floor Standing Installation to joint the
neighboring topmost PIM in 6 PIM or more configurations.
One set of I/F Bracket is required for multiple stacks.
Base Tray Assembly
(Optional 1 per stack)
This is used for Floor Standing Installation for stationary
equipment (UL complied). One set of Base Tray Assembly is
required for each stack.