NEC Express 5800, Руководство пользователя

Страница: 528 / 719

528
Supported Standard Commands
General description
The following standard SMASH-CLP commands defined by DMTF specification are supported
by the management firmware.
Command Function Privilege
cd
Move to the target.
Operator
dump Move the dump from the memory map to the URI.
Used for saving SG Information. Administrator
exit Terminate the CLP session
Operator
help Display the help menu
Operator
load
Move the binary image from the URI to the memory map.
Used for restoring SG Information and updating the firmware.
Administrator
reset Power OFF the target compulsory. Operator
set Set the value to the target property. Operator
show Display the target property and contents such as settings for
the network or user account Operator
start Power ON the target Operator
stop Shut down OS for the target Operator
version Display the version of SMASH-CLP
Operator
IMPORTANT:
•The interruption of the command by CTRL + C is not
supported. However there are some exceptions.
NOTE:
•The operations for SMASH-CLP is similar to the one of Linux or
UNIX. For example, the “show”“ command is equivalent to
“ls” for Linux and UNIX. The target is equivalent to the
directory for Linux and UNIX.
•The prompt for SMASH-CLP is “->”.