NEC Express 5800, Руководство пользователя

Страница: 215 / 719

Hardware
215
Display at Fault Occurrence
When selecting and executing “View Faults” in Main Menu , the screen moves to View Faults.
“View Faults” is displayed only when there is a failed module or unit in the system.
Display Format for View Faults
(1) FRU Name : Full name of FRU is displayed.
(Maximum number of displayed characters is 12)
(2) FRU Location : Proper location of FRU in the system is displayed.
(Maximum number of displayed characters is 19)
FRU location can be specified with this string.
(3) Server Number : Server number that FRU belongs to is displayed.
(Maximum number of displayed characters is 6)
It is hidden when FRU does not belong to any server.
(4) Reference to document : Document name to be referred to in order to replace FRU parts for
maintenance. (Maximum number of displayed characters is 19)
“See Maint Guide” is displayed fixedly on “View Faults.”
 One failed FRU information is displayed on one screen.
 The bottom right edge “ ↓ ” display or top right edge “ ↑ ” display is the indication of the FRU
information available on that direction.
 Scroll the View Faults screen to the next page or previous page with “Up” or “Down” button.
 Press “OK” button to return to Main Menu .
 Information on a failed FRU will be cleared when FRU parts indicated below are replaced for
maintenance.
To be cleared by online replacement : Internal Hard Disk Drive
To be cleared by physical parts replacement : Processor Memory Module (PMM),
Management Module (MGM),
Cooling Fan, Power Supply Unit (PSU)
Base Module
(1)
(2)
(3)
S e e M a i n t G u i d e
↓
(4)
NOTE:
For parts such as DIMM not cleared by the above replacement, it is
required to go to [Main Menu]
-> [Serverx] and execute [Clear All
Faults] after resolving the cause of Fault. If executing this option
without resolving the cause of Fault, this message may be deleted,
but Fault may occur again.