background image

 

  

 NATIONAL 

INSTRUMENTS

®

The Software is the Instrument

®

Installation Guide

                                                                                                         

371193A-01

© Copyright 1995 National Instruments Corporation.  All rights reserved.

March 1995

SCXI-1370 Rack-Mount Kit

for the SCXI-1001 Chassis

This guide describes how to attach the SCXI-1370 rack-mount kit to an SCXI-1001 chassis.

Introduction

You can use the SCXI-1370 rack-mount kit to mount the SCXI-1001 chassis in a standard
19 in. rack.  With the multiposition rack-mount brackets, you can install the SCXI-1001 in one of
six different positions to attain the desired front panel depth.

What You Need to Get Started

SCXI-1370 rack-mount kit

Two rack-mount brackets
Four 8-32 by 5/16 in. Philips flathead screws
Four 10-32 by 1/2 in. Philips panhead screws
Two 6-32 by 1/4 in. Philips flathead screws
SCXI-1370 Rack-Mount Kit Installation Guide

#2 Philips-head screwdriver

SCXI chassis

Installation

Refer to Figure 1 as you perform the following installation steps.  The rack-mount brackets can
be mounted in one of six positions to attain different depths.  For detailed measurements of the
SCXI-1001 chassis, refer to Appendix A, Specifications, of the SCXI-1000/1000DC/1001 User
Manual
.  Item numbers refer to the labels in Figure 1.

1. Turn the SCXI-1001 chassis power off.

2. Use the four 8-32 screws (item 1) to attach the rack-mount brackets (item 2) to your SCXI

chassis.

3. Use the two 6-32 screws (item 3) to secure the rack-mount brackets to your SCXI chassis

when the brackets are in positions 1, 2, 3, or 4.

4. Use the four 10-32 screws (item 4) to attach the assembly to your rack.

Отзывы: