manualshive.com logo in svg

NEC Express 5800, Руководство пользователя, Страница: 588 / 719

Поделиться
Скачать
NEC Express 5800 Скачать руководство пользователя страница 588

Operation and Maintenance 

 

588

 

Cleaning the Keyboard/Mouse 

 

Make sure that the server and peripheral devices are powered off (the POWER/SLEEP LED is   
unlit), and then wipe the keyboard surface with a dry cloth.

 

The mouse operation depends on the degree of smoothness of the internal ball rotation. To keep   
the mouse ball clean, use the mouse in a place with little dust. Follow the steps below regularly to   
clean the mouse:

 

 

1. 

Make sure that the server is powered off (the POWER LED is unlit).

 

 

2. 

Turn the mouse upside down, and rotate the mouse ball cover counterclockwise to remove 

it. Take out the ball from the mouse.

 

 

3. 

Wipe the mouse ball with a dry soft cloth. 

Or, soak a soft cloth in neutral detergent that is diluted with cold or lukewarm water, and 
squeeze it firmly. Rub off stains on the mouse ball.

 

 

4. 

Wipe three small rollers inside the mouse with a cotton swab soaked with alcohol.

 

 

5. 

Put the mouse ball back into the mouse. 

If the mouse ball or roller is wet in Step 3 or 4, be sure to fully dry it before putting the mouse 
ball in the mouse.

 

 

6. 

Place the mouse ball cover, and rotate it clockwise until it is locked.

 

 
 

 

Содержание Express 5800
















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов