NEC Express 5800, Руководство пользователя

Страница: 499 / 719

499
Display Example 2 (status of the sensor)
LCD String Event
Pwr NoRdn Redundancy Lost
Pwr RdnDeg Redundancy Degrade
Pwr Insuff Non-Redundant: Insufficient Resource
WDT Timeout Timer expired, status only
WDT HardReset Hard Reset
WDT Power Down Power Down
WDT Power Cycle Power Cycle
WDT Timeout Timer Interrupt
DUMP Request! Front Panel NMI
Bus Uncorr Bus Uncorrectable Error
SMI Timeout State Asserted
Mem Uncor Err Uncorrectable ECC memory error
Mem Scrub Fail Memory Scrub Failed
Mem Corr Err Correctable ECC/ other correctable memory error logging limit detected
Mem Config Err Configuration Error
WDT2 Timeout Timer expired, status only
WDT2 HardReset Hard Reset
WDT2 Power Down Power Down
WDT2 Power Cyc
Power Cycle
WDT2 Timeout Timer Interrupt
MG1 Sens Fail Not Acknowledged
MG1 Sens Fail Device Error Detected
MG1 Sens Fail Timeout
MG1 Non-Crit transition to Non-Critical from OK
MG1 Critical transition to Critical from less severe
MG1 Sens Fail Not Acknowledged
MG1 Sens Fail Device Error Detected
MG1 Sens Fail Timeout
MG1 Non-Crit transition to Non-Critical from OK
MG1 Critical transition to Critical from less severe