manualshive.com logo in svg

NEC Express 5800, Руководство пользователя, Страница: 589 / 719

Поделиться
Скачать
NEC Express 5800 Скачать руководство пользователя страница 589

Operation and Maintenance 

 

589

 

Cleaning CD/DVD 

 

A dusty CD/DVD-ROM or dust-accumulated tray causes the device to fail to read data correctly. 
Follow the procedure below to clean the tray and CD/DVD-ROM regularly:

 

 

1. 

Make sure that the server is powered off (the POWER LED is unlit).

 

 

2. 

Press the tray eject button on the front of the DVD drive. The tray comes out.

 

 

3. 

Hold the CD/DVD-ROM lightly and take it out from the tray.

   

 
 
 
 
 

4. 

Wipe the tray with a dry soft cloth.

 

 
 
 
 
 

5. 

Gently push the tray to retract it to the tray.

 

 

6. 

Wipe the signal side of the CD/DVD-ROM with a dry soft cloth.

 

 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

IMPORTANT: 
Do not touch the signal side of the CD/DVD-ROM with your hand.

 

IMPORTANT: 
Do not wipe the lens of the DVD drive. Doing so may damage the 
lens and may cause a malfunction of the drive.

IMPORTANT: 
Wipe CD/DVD-ROMs from the center to the outside. 
Use only CD/DVD-ROM cleaner if necessary. Cleaning a CD/DVD-ROM 
with record spray/cleaner, benzene, or thinner causes damage to the 
CD/DVD-ROM contents. At worst, inserting the CD/DVD-ROM into the 
server may cause failure.

 

Содержание Express 5800
















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов