Better Solutions Are Within Reach
®
MODEL NUMBER:
PDI-267 & PDI-233
Document Number:
PD196-088R4
Vertical Stop Kits
Page 1 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
INTRODUCTION
The PDI-267 Vertical Stop Kit is designed to provide additional wall clearance for the 500 Series
arm and PDI-233 Vertical Stop Kit will provide additional clearance for the 400 Series support arm
when in the folded position. Increased clearance is particularly helpful to allow the arm to be
installed beneath a head wall light or other obstruction.
INSTALLATION
1. With the arm installed
in the wall bracket, pull
the arm forward away
from the wall to expose
the Stop Bolt Hole.
2. Thread a Nylon Spacer
onto the stop bolt. Fit
the bolt into the Stop
Bolt Hole.
3. Fit the remaining Nylon
Spacer onto the bolt
end and secure with
the Stover Nut
provided.
4. Cycle the arm and
verify correct
operation and improved
wall clearance.
NOTE
: Larger diameter
nylon spacers are available
to provide increased wall
clearance. Please refer to
Page 2 of this instruction
sheet for details. (These
may interfere with plastic
base covers)
Stop Bolt Hole
Nylon Spacer (2)
Stop Bolt
Stover Nut
