Mitsubishi Electric FR-F820-00046, Инструкция по эксплуатации

Страница: 374 / 940

(M) Monitor display and monitor output signal Parameters
5 - 202
When using the monitor item as the main monitor data on the LCD operation panel (FR-LU08) or
the parameter unit (FR-PU07), use Pr.774 to Pr.776 or the monitor function of the FR-LU08 or the
FR-PU07 for setting.
The cumulative energization time and actual operation time are accumulated from 0 to 65535
hours, then cleared, and accumulated again from 0.
The actual operation time does not increase if the cumulative running time before power OFF is
less than an hour.
When using the parameter unit (FR-PU07), "kW" is displayed.
!
Differs according to capacities. (FR-F820-02330(55K) or lower, FR-F840-01160(55K) or lower /
FR-F820-03160(75K) or higher, FR-F840-01800(75K) or higher)
BACnet recep-
tion status
1 81 H51 40281
Displays the BACnet reception
status.
BACnet token
pass counter
1 82 H52 40282
Displays the count of received
token.
BACnet valid
APDU counter
1 83 H53 40283
Displays the count of valid APDU
detection.
BACnet commu-
nication error
counter
1 84 H54 40284
Displays the count of
communication error detection.
BACnet terminal
FM/CA output
level
0.1% 85 H55 40285
Displays the value set in the
Analog Output object
(ID = 0: Terminal FM/CA) for
BACnet communication.
BACnet terminal
AM output level
0.1% 86 H56 40286

Displays the value set in the
Analog Output object
(ID = 1: Terminal AM) for BACnet
communication. (A display
without signs displays negative
values as absolute values.)
Remote output
value 1
0.1% 87 H57 40287

Displays the setting values of
Pr. 656 to Pr. 659 (analog remote
output).
(Refer to page 5-249.)
Remote output
value 2
0.1% 88 H58 40288
Remote output
value 3
0.1% 89 H59 40289
Remote output
value 4
0.1% 90 H5A 40290
PID manipulated
variable
0.1% 91 H5B 40291

Displays the PID control
manipulated amount.
(Refer to page 5-368)
Second PID set
point
0.1% 92 H5C 40292
Displays the set point, measured
value, and deviation under
second PID control.
(Refer to page 5-368)
Second PID
measured value
0.1% 93 H5D 40293
Second PID
deviation
0.1% 94 H5E 40294

Second PID
measured value
2
0.1% 95 H5F 40295
Displays PID measured value
even if PID control operating
conditions are not satisfied while
the PID control is enabled (Pr.753
≠
"0").
(Refer to page 5-368)
Second PID
manipulated
variable
0.1% 96 H60 40296

Displays the second PID control
manipulated amount.
(Refer to page 5-368)
Control circuit
temperature
1 °C 98 H62 40298

Displays the temperature of the
control circuit board.
Without minus sign: 0 to 100 °C
With minus sign: –20 to 100 °C
Types of
monitor
Unit
Pr. 52,
Pr. 774 to Pr. 776,
Pr. 992
RS-485
communica-
tion dedicat-
ed monitor
(hexadeci-
mal)
MODBUS®
RTU real
time
monitor
Minus (-)
display
Description
Tab. 5-87: Monitor description list (4)