Mitsubishi Electric FR-F820-00046, Инструкция по эксплуатации

Страница: 373 / 940

Parameters (M) Monitor display and monitor output signal
FR-F800 5 - 201
Option input
terminal status
"
— 56 — —
Displays input terminal ON/OFF
state of the digital input option
(FR-A8AX) on the DU.
(Refer to page 5-206 for details.)
Option output
terminal status
"
— 57 — —
Displays output terminal ON/OFF
state of the digital output option
(FR-A8AY) and the relay output
option (FR-A8AR) on the DU.
(Refer to page 5-206 for details.)
Option input
terminal status 1
(for
communication)
"
— —
H3A
'
40258
'
Input terminal X0 to X15 ON/OFF
state of the digital input option
(FR-A8AX) can be monitored via
RS-485 communication and the
communication option.
Option input
terminal status 2
(for communica-
tion)
"
— —
H3B
&
40259
&
Input terminal DY ON/OFF state
of the digital input option
(FR-A8AX) can be monitored via
RS-485 communication and the
communication option.
Option output
terminal status 1
(for communica-
tion)
"
— —
H3C
(
40260
(
Output terminal ON/OFF state of
the digital output option
(FR-A8AY) and relay output
option (FR-A8AR) can be
monitored via RS-485
communication and the
communication option.
Motor thermal
load factor
0.1% 61 H3D 40261
Displays the accumulated heat
value of the motor thermal O/L
relay.
The motor overload trip (E.THM)
occurs at 100%.
Inverter thermal
load factor
0.1% 62 H3E 40262
Displays the accumulated heat
value of the inverter thermal O/L
relay.
The inverter overload trip (E.THT)
occurs at 100%.
PTC thermistor
resistance
0.01 kΩ 64 H40 40264
Displays the PTC thermistor
resistance when Pr. 561 "PTC
thermistor protection level" ≠
9999 (voltage monitor when
Pr. 561 = 9999).
PID measured
value 2
0.1% 67 H43 40267
Displays PID measured value
even if PID control operating
conditions are not satisfied while
the PID control is enabled (Pr.128
≠
"0").
(Refer to page 5-368)
Emergency drive
status
$
1 68 H44 40268
Displays the emergency drive
status
(Refer to page 5-167)
PID input
pressure value
0.1% 69 H45 40269
Displays the input pressure value
of the PID input pressure control
function.
32-bit cumula-
tive power
(lower 16 bits)
1 kWh — H4D 40277
Displays the 32-bit cumulative
power value in multiplies of 16
bits.
Monitoring can be performed via
RS-485 communication and
communication options. (To find
the monitor codes for each
communication option, refer to
the Instruction Manual of each
communication option.)
32-bit cumula-
tive power
(upper 16 bits)
1 kWh — H4E 40278
32-bit cumula-
tive power
(lower 16 bits)
0.01 kWh/
0.1 kWh
!
— H4F 40279
32-bit cumula-
tive power
(upper 16 bits)
0.01 kWh/
0.1 kWh
!
— H50 40280
Types of
monitor
Unit
Pr. 52,
Pr. 774 to Pr. 776,
Pr. 992
RS-485
communica-
tion dedicat-
ed monitor
(hexadeci-
mal)
MODBUS®
RTU real
time
monitor
Minus (-)
display
Description
Tab. 5-87: Monitor description list (3)