Minolta Di250f, Руководство оператора

Страница: 299 / 339

14-5
1. If the Following Icons and Alarm Messages Are Displayed
Ch
ap
ter
14
T
rou
bl
e
sh
oot
in
g
This mode cannot be selected
with the Exclusive Paper mode. Stapling or 2-Sided copying is
selected after a drawer with thick
paper or OHP sheets is selected. •Cancel the stapling or 2-Sided
copying function.
☞
p. 4-4, 4-16
•Reselect the paper. “Selecting
the Copy Paper Size for
Copying”
☞
p. 2-5
Please remove all copies in the
non-sort tray. The document tray cannot be
selected as paper remains in the
non-sort tray. Remove all paper from the non-
sort tray.
Please remove the original in the
Document Feeder and place the
original in the SADF. The document is set on the Single
Feed Tray while documents
remain in the Automatic
Document Feeder. Place the document in the Single
Feed Tray after removing the
document from the Automatic
Document Feeder.
This application cannot be
changed now, select Interrupt
mode to change the application. The Fax key is pressed while the
copying function is active. Press the Interrupt key to stop
copying, then press the Fax key.
Return the following number of
originals to Document Feeder. Paper misfeed has occurred while
the Automatic Document Feeder
is being used for copying. Return indicated pages of the
document to the Automatic
Document Feeder.
Cannot interrupt this job: not
enough free memory. Press Start
to resume. The Interrupt key is pressed
while copying, but interruption is
unavailable because the memory
capacity is insufficient. Press the Start key to restart
copying operation prior to
interruption.
Cannot interrupt this job: not
enough free memory. The Interrupt key is pressed, but
interruption unavailable because
the memory capacity is
insufficient. Please wait until sufficient
memory becomes available.
Original’s size cannot be
detected. Reselect the paper size. The document size could not be
detected with the automatic paper
mode. Select the paper size. “Selecting
the Paper Size for Copying”
☞
p. 2-5
Original’s size cannot be
detected. Select Zoom. The document size could not be
detected with the automatic size
mode. •Set the Zoom ratio. “Selecting
the Zoom Ratio for Copying”
☞
p. 2-9
•Select a different size of paper.
“Selecting the Copy Paper Size
for Copying”
☞
p. 2-5
Original’s size cannot be
detected. Select Original size. The document size could not be
detected. •Place the document again.
•Reselect the document size.
•Cancel the image repeating
function.
☞
p. 4-28
Original’s size can’t be detected.
Reposition the original or cancel
following modes. The document size could not be
detected. •Place the document again.
•Reselect the document size.
•Cancel the indicated functions.
Messages Causes Countermeasures
chapte14.fm Page 5 Thursday, September 16, 1999 8:33 PM