Minebea Intec CSD-903, Руководство по эксплуатации

Страница: 86 / 244

10.12 Brands (Products)
Brand comparison values can be set for individual brand numbers.
Weighing is controlled using the various brand settings to ensure the target (OK) weight
is achieved.
The CSD-903 can save up to 8 brands.
For details of brand settings, refer to Chapter
11 .
10.12.1 Brand changeover
The brand number can be changed by function, external control input or communication.
The changeover method is enabled when brand number switching is selected using
function F-51.
To change the brand number in EzCTS mode, set function F-51 to [0: Changeover by
function]
Setting range: 0 to 3
0: Changeover by function
The brand number can be changed by the function F-52 setting.
To change the brand number using standard RS485, RS-232C and RS-422/485, use
communication command [@007052].
For details of communication commands, refer to Chapter
18.3.12 .
1: Changeover by external control input
Brand number changeover can only be enabled using external control input. If
changeover by external control input is selected, refer to Chapter 10.14 .
2: Changeover by communication
This enables brand number changeover using communication command [@0069].
For details of communication commands, refer to Chapter
18.3.12 .
The default is [Changeover by key operation].
10.12.2 Brand number
The brand number enabled by measurement control is selected using function F-52.
Brand numbers 0 to 7 can be selected.
Default is set to [Brand No. 0].
10.13 F key settings
F key operation is selected by function F-55.
Setting range: 0 to 9
0: OFF No setting
1: Print Inputs the print signal
2: Hold Inputs the hold signal
3: Inlow start Inputs the inlow start signal
4: Emergency stop Inputs the emergency stop signal
5: Zero clear After zero set and zero tracking are executed, the display
returns to its former status.
Weight indicator CSD-903 10 Various operations by function data
EN-84 Minebea Intec