Minebea Intec CSD-903, Руководство по эксплуатации

Страница: 204 / 244

Item Function No. Number Return command set value
Discharge monitor timer 72 46 0000 to 9999 (Unit: 0.01 s)
Discharge gate close delay time 72 47 0000 to 9999 (Unit: 0.01 s)
Discharge inish output time 72 48 0000 to 9999 (Unit: 0.01 s)
Tare weight cancellation at
discharge inish
72 49 0: Invalid; 1: Efective
Note:
Change [7*] of abovementioned command to [8*] at the time of writing.
Items [40] to [47] are only read-only.
When calibration lock is valid, command [71] is read-only.
The data setting values [90] to [97] are read-only as they are calibration items.
Writing switches to commands [7*] to [8*].
18.3.12.13 Communication error processing
The device replies with the error command to the host side when a communication or
execution error occurs.
6 6 8 4 2
@ 0 0 E R 0 1 Terminator
Address
00 ~ 31
Error command No.
Error
Command No.
Details Remarks
01 Non-executable error In calibration mode, function mode or check mo-
de
02 Other errors for this unit The receiving command cannot be executed.
10 Parity error Parity detection error
11 Fleming error Stop bit detection error
12 Overrun error Receiving command read error
13 Data code and data length error The receiving data code and data length do not
correspond.
14 No pertinent command The receiving command does not correspond.
20 Error display for zero calibration The load cell output voltage is –2.5 mV/V or less.
21 Error display for zero calibration The load cell output voltage is 2.5 mV/V or more.
22 Error display for span calibration The diference in load cell output voltage bet-
ween span point and zero point is 0.0 mV/V or
less.
Weight indicator CSD-903 18 Options
EN-202 Minebea Intec