Minebea Intec CSD-903, Руководство по эксплуатации

Страница: 144 / 244

- Status
Status is written as bits to input register addresses 51, 55, 59 and 63.
Bit Details
Bit 15 STABLE
Bit 14 TARE WEIGHT CANCELLATION SETTING
Bit 13 TARE WEIGHT CANCELLATION
Bit 12 GROSS WEIGHT
Bit 11 NET WEIGHT
Bit 10 CENTER OF ZERO
Bit 9 HOLD
Bit 8 ERROR
Bit 7 NEAR ZERO
Bit 6 FULL (Coarse) FLOW/S1
Bit 5 MEDIUM (Middle) FLOW/S2
Bit 4 SMALL (Fine) INFLOW/S3
Bit 3 OVER/S4
Bit 2 OK/S0
Bit 1 UNDER
Bit 0 FULL
- Status error codes
Status error codes are written as numbers to input register addresses 52, 56, 60 and
64.
Number Details
1 If zero setting was performed outside the valid zero setting range
2 If an unlisted number was selected for C function or function setting
4 A/D conversion error
8 If tare weight cancellation was performed outside the tare weight can-
cellation operation range
10 Lights when the weight display exceeds [(–weighing value) – 9 D],
exceeds [–110% of weighing value], or exceeds [–20 D] (depending on
C function CF-03 setting).
11 Lights when the weight display exceeds [(+weighing capacity) + 9 D] or
exceeds [+110% of weighing capacity] (depending on C function CF-03
setting).
12 A/D converter input negative overload
13 A/D converter input positive overload
Weight indicator CSD-903 17 ModBus communication
EN-142 Minebea Intec