MIMAKI UJF-605C, Руководство по эксплуатации

Страница: 13 / 154

- xi -
Never do the following
Do not disassemble or remodel the device
• Never disassemble or remodel the
main unit of the printer and the ink
cartridge. Disassembling/remodeling
any of them will result in electric
shocks or breakdown of the device.
Do not use the device in damp places
• Avoid damp environments when
putting the device into service. Do not
splash water onto the device. High-
humidity or water will give rise to fire,
electric shocks or breakdown of the
device.
Abnormal event occurs
• If the device is used under an
abnormal condition where the device
produces smoke or unpleasant smell,
fire or electric shocks can result. Be
sure to turn off the power switch
immediately and detach the plug from
the receptacle. Check first to be sure
that the device no longer produces
smoke, and contact a distributor in
your district for repair. Never repair
your device by yourself since it is very
dangerous for you to do so.
Laser sensor
WARNING
• This device is equivalent to Class II
laser device according to CDRH
Regulation. LASER CAUTION Label
for CDRH regulation shown below is
provided with the device.
To avoid causing pain in your eyes or
visual impairment, do not review the
laser beam through a lens or the
other optical observation system.
• Never look at the laser light, or it may
cause pain in your eyes or visual
impairment.
Handling of ink cartridges
• Store ink cartridges and waste ink
tank in a place that is out of the reach
of children.
• If ink settles on the skin or clothes,
immediately wash it off with detergent
or water.
If you get ink in your eyes,
immediately wash your eyes with a lot
of clean water for at least 15 minutes.
In this case, also wash the backside
of eyelids to rinse ink away
completely. Then, consult a doctor as
soon as possible.
• Some of the ingredients (UV Curing
initiator) have toxic consequences to
aquatic life. Avoid leak into water
system or sewage containing water.
Grounding work
• This unit requires grounding work to
prevent electrical shock.
• Carry out the grounding work.
Wearing protective devices
• When cleaning the suction nozzle
and/or cap, which may scatter ink, be
sure to wear safety glasses and
gloves, or ink and washing liquid
might enter your eyes or ink and
washing liquid put on your hands
might make your hands rough.
Opening / closing covers
• This unit is equipped with covers.
When opening or closing the covers,
there is a possibility that your fingers
or arms or a part of your body will be
pinched. If it should occur, it may
cause bruises or, in the worst case,
crushing to death. When opening or
closing the covers, take care so that
your body or a part of it is never
pinched.
Maximum output
Pulse duration Wave length :650nm
Laser medium:A/Ga/nP : 3mW
: 3.5µs